|
Pulleys and Bushing
 |
QD AND TAPER-LOCK
PULLEYS (3VX, A and B Belt)
V-Groove sheaves and matching
V-Belts used to transmit rotating mechanical power between two shafts on
medium to high speed applications.
Economical cost per HP transmitted. Shock load
and vibration isolation. Clean, quiet operation. Capable of up to 1/2 deg
misalignment.
Stock drive selections covering 1 HP to over 1000 HP application range.
25,000 hours average life with proper selection, installation and
maintenance. Speed reduction or speed increase ratios of 1:1 to over 6:1
available. Manufactured to MPTA (Mechanical Power Transmission Association)
industry standards. 92% to 95% drive efficiency is typical.
-
Classical and wedge style groove profiles
-
Stock sizes from one to twelve grooves, 1.5" to
71" in diameter
-
Available in QD and Taper-Lock bushed or
finished bore
-
Made to order designs also available
3V-Belt Sheaves
A&B Taper-Lock Sheaves
QD Sheaves
|
 |
QD DODGE BUSHING
SYSTEM
Tapered split bushings
that fit into a matching tapered bore in a sheave, sprocket, pulley, etc.,
used to securely mount the product onto a shaft.
Allows a product to be securely mounted to any shaft size within the range
of the bushing series. No need for remachining. Tapered bushing compensates
for normal variations in shaft and component dimensional tolerances.
Easy-on/Easy-off, no fretting corrosion between bore and shaft. Taper-Lock
bushings are flangeless for clean, compact application.
QD: JA, SH, SDS, SD, SK, SF, E, F, J, M, N, P, W,
S.Material: Sintered steel, cast iron, ductile iron, steel, stainless
steel.
QD Bushings Selection
|
 |
TAPER-LOCK DODGE
BUSHING
Tapered split bushings
that fit into a matching tapered bore in a sheave, sprocket, pulley, etc.,
used to securely mount the product onto a shaft.
Allows a product to be securely mounted to any shaft size within the range
of the bushing series. No need for remachining. Tapered bushing compensates
for normal variations in shaft and component dimensional tolerances.
Easy-on/Easy-off, no fretting corrosion between bore and shaft. Taper-Lock
bushings are flangeless for clean, compact application.
Taper-Lock: 1008, 1108, 1210,1215,1310, 1610, 1615, 2012, 2517, 2525, 3020,
3030, 3535, 4040, 4545, 5050, 6050, 7060, 8065, 10085, 120100.
Taper-Lock Bushing Selection |
|
|
WELD ON HUB
Taper-Lock or QD weld-on
hubs for use in the fabrication of conveyor pulleys, plate sprockets, fans,
impellers, etc. Weld-on hubs are made of low carbon steel for good welding
compatibility.
Taper-Lock weld-on hubs: Weld-on hubs are made of
1015-1025 steel, drilled, tapped and taperbored to receive the
TAPER-LOCK bushing. They are useful for welding into fan rotors,
pulleys, plate sprockets, etc., which must be firmly mounted onto
shafting. Four types of hubs are available from stock.
QD weld-on hubs: Weld-on hubs are made of low
carbon steel for good welding compatibility. They are useful for welding
into fan rotors, impellers, agitators, etc., which require secure
mounting to the shaft. A standard type is available in addition to one
that is specifically designed for use in the end disc of a conveyor
pulley.
Taper-Lock weld-on hubs: Hubs available to
handle up to the 120100 bushing. Stock sizes available to handle up
to 12" shaft diameters.
QD weld-on hubs: Hubs available to handle the
JA through the W series QD bushings. Hubs also available to handle
the H bushings for FHP sheaves. Stock sizes available to handle up
to 12" shaft diameters.
|
|
|
SPROCKETS ROLLER
CHAIN
Sprockets for use with
roller chain, generally to provide transmission of power between two
low-speed shafts.
No slip transmission, minimal overhung load on shaft bearings, generally
used in lower speed ranges (e.g. 1-300 RPM). Low cost, rugged performance.
TAPER-LOCK bushed sprockets in pitches from #35 (3/8"pitch) to #160 (2"
pitch), number of teeth range from 9 to 112. Also available are double
strand, double-single, B-reborable and A-plate sprockets.
Taper-Lock Roller Selection
|
|
